Table of contents for Chapter 7030



Subpart 1. Purpose. Sound level measurements made for assessing sound attenuation as specified in part 7030.0050, subpart 3, item B, C, or D, shall be made according to the requirements of this part.

Subp. 2. Equipment. The equipment shall meet the requirements specified in part 7030.0060, subpart 2.

Subp. 3. Calibration. The equipment must meet the calibration requirements specified in part 7030.0060, subpart 3.

Subp. 4. Measurement procedure. The measurement procedure described in FHWA-DP-45-1R, section 8 must be used for determination of the sound attenuation.

Subp. 5. Equivalent methods. Methods equivalent to those described in subpart 4 may be used provided they are approved by the commissioner of the Minnesota Pollution Control Agency. The commissioner shall approve an alternative method if the commissioner finds that the method will produce representative data and results which are as reliable as the methods specified in subpart 4.

STAT AUTH: MS s 116.07 subds 2,4

HIST: 11 SR 43; L 1987 c 186 s 15; 18 SR 614

Current as of 05/13/97

NPC Menu Bar NPC Home Page Support NPC Ask NPC Search the NPC Home Page NPC QuietNet NPC Resources NPC Hearing Loss and Occupational Noise Library NPC Noise News NPC Law Library NPC Library